Shanked Tinsley 3D FX Transfer
Creating the perfect stab wound can be really hard! There's a really fine line between creating a stab wound and creating a slice in the skin. Stab wounds tend to be smaller with finer details and that's why these realistic stab wound transfers are one of our favourites! Created by Tinsley Transfers, this pair of special FX wounds are easy to apply with a little water (no adhesive required) and you can jazz them up a little with some special effects blood to add to the realistic effect!
Description:
- Shanked realistic wounds film quality, latex free special FX transfer.
- Cuts come as a set of two.
- Knife wounds apply simply with water like a temporary tattoo and blend into your skin.
- Full application instructions on the back of the packaging.
- Prosthetic is made in the USA.
How To Apply:
- Carefully cut the top off the packaging
- Remove the wound from the packaging - it should be on a white backed card
- Peel the plastic sheet away from the white card - the wound should be stuck to the plastic sheet leaving the white card blank
- Place the appliance face down (sticky side down) onto the white blank card
- Push out any trapped air and firmly press the appliance down onto the white card
- Cut out around the appliance - this can be done all in one or in sections if you wish to apply sections seperately
- Prior to applying to the skin, thoroughly clean the area and remove any dirt, oils, makeup or excessive body hair
- Once the appliance is firmly pressed on the white card, you can peel the plastic layer off
- Place the appliance sticky side down onto the skin and press firmly
- Once appliance is pressed onto the skin, wet the paper with a damp cloth or sponge
- Once the paper is thoroughly damp, slowly peel the paper off and the wound should now be stuck to the skin
- Press any loose edges down with a wet finger
- Add blood and makeup to complete your look
